AT: Tenergy 11.1V 1150mAh LIPO Rechargeable Battery Pack w/ PCB Protection

Features and Benefits

• 11.1V 1150mAh Polymer Li-Ion Polymer battery pack 
• Voltage: 11.1v (working)
• Capacity: 1150mAh 
• Max. Discharging rate:  1.3Amp with PCB
• One protective circuit board PCB installed with the battery pack that limits the discharging current of  battery pack to 6.5Amp. But protect battery from:
  - Over-charging cut-off: 12.6V
  - Over-discharging cut-off: 7.2V
  - Over-drain >5Amp
  - Short circuit  and Wrong polarity
• Light-weighted : 77g.
• Dimension: 66mm x 40mm x 18mm
• 4" (12mm) long prewired and shrink wrapped
• Recommended charger: Universal Li-ion / Li-polymer Smart Charger to charge this battery pack.
• If you connect two of these modules in parallel, you can build a 7.4V 1.75 Ah Battery pack with a 1.7 Amp discharge rate.
• Applications:
  - HID Bikelight or Dive light
  - Autonomous submarine
  - RC Car and RC airplane with greater energy needs
  - Building external battery packs for Laptop computers or 12V portable devices

Caution:

Improper use like overcharging and over discharging can cause explosion and/or fire. User of the battery is required to  have sufficient Li-polymer charging experience and technical knowledge. Tenergy or All-Battery.com are not responsible for any damage or injury caused by misuse, misunderstanding or abuse of this product.