AT: Tenergy 14.8V 6000mAh Heavy Duty LIPO Battery Pack w/ PCB Protection

Features and Benefits

• 14.8V 6000 mAh Polymer Li-Ion technology made of 4-cell Polymer Li-Ion cell of 3.7V 6000mAh
• Voltage: 14.8v (working)   16.8V ( peak)
• Capacity: 6000mAh 
• Max. Discharging rate:  6.5Amp with PCB 
• One protective circuit board PCB installed with the battery pack that limits the discharging current of  battery pack to 6 Amp. But protect battery from:
  - Over-charging cut-off: 17.4V
  - Over-discharging cut-off; 9.6V
  - Over-drain ( >6.5Amp)
  - Short circuit  and Wrong polarity
• Light-weighted : 17 oz.
• Dimension: 169mm x 52mm x 30mm
• 4" (12mm) long prewired and shrink wrapped
• Recommended charger: Universal Li-ion / Li-polymer Smart Charger to charge this battery pack.
• If you connect two of these modules in parallel, you can build a 14.8V 12.7 Ah Battery pack with a 14 Amp discharge rate.
• Applications:
  - HID Bikelight or Dive light
  - Autonomous submarine
  - RC Car and RC airplane with greater energy needs
  - Building external battery packs for Laptop computers or 12V portable devices

Caution:

Improper use like overcharging and over discharging can cause explosion and/or fire. User of the battery is required to  have the sufficient Li-polymer charging experience and technical knowledge. Tenergy or All-Battery.com are not responsible for any damage or injury caused by misuse, misunderstanding or abuse of this product.