AT: Tenergy 25.9V 11600mAh Heavy Duty LIPO PCB Protected Battery Pack w/ Bare Leads

Features and Benefits

• Made of 14 Pcs 5800mAh Polymer Li-Polymer single cells in series
• Voltage: 25.9v (working)   26V ( peak)
• Capacity: 11600mAh (12.7AH)
• Max. Discharging rate:  10Amp with PCB #32062
• One protective circuit board PCB installed with the battery pack that limits the discharging current of  battery pack to 6 Amp. But protect battery from:
  - Over-charging cut-off; 26V 
  - Over-discharging cut-off: 20V
  - Over-drain current limit; 6.5A
  - Short circuit and Wrong polarity protection
• 11" 16 AWG wire
• Poly switch: One 9 Amp polyswitch installed to limit discharge current at 18 Amp
• Weight : 2267 grams
• Dimension: 168mm x 135 mm x 41.5 mm
• Recommended charger:  e-Station BC-6 AC/DC Balancing Charger to charge this battery pack.
• Great for any super long external power purposes.
• Can use AnyVolt DC-DC voltage converter/stablizer to obtain unfluctuating 2.5V to 24V Voltage

  Caution:

  Improper use like overcharging and over discharging can cause explosion and/or fire. User of the battery is required to  have the sufficient Li-polymer charging experience and technical knowledge. Tenergy or All-Battery.com are not responsible for any damage or injury caused by misuse, misunderstanding or abuse of this product.