Tenergy 25.9V 12000mAh Heavy Duty LIPO PCB Protected Battery Pack w/ Molex Connector

Features and Benefits

• Made of 14 Pcs 6000mAh Polymer Li-Polymer single cells in series (7S2P)
• Voltage: 25.9V (Working), 29.4V (Peak)
• Capacity: 12000mAh (12Ah)
• Discharging rate: 6A with PCB #32062
• One protective circuit board (PCB) installed with the battery pack that limits the discharging current of  battery pack to 6 Amp. But protect battery from:
  - Over-charging cut-off: 29.4V
  - Over-discharging cut-off: 17.5V
  - Over-drain current limit: 6A (Typ)
  - Short circuit and Wrong polarity protection
• 11" 16 AWG wire with Molex 44441-2002
• Poly switch: Two 9 Amp poly-switch installed to limit discharge current at 18 Amp
• Weight : 2267 grams
• Dimension: 170mm x 135 mm x 41.5 mm
• Recommended charger: e-Station BC-6 AC/DC Balancing Charger to charge this battery pack.
• Great for any super long external power purposes.

Caution:

Improper use like overcharging and over discharging can cause explosion and/or fire. User of the battery is required to have the sufficient Li-polymer charging experience and technical knowledge. Tenergy or All-Battery.com are not responsible for any damage or injury caused by misuse, misunderstanding or abuse of this product.