Combo: 4 PCS Tenergy Li-Ion 18650 Cylindrical 3.7V 2600mAh Flat Top Rechargeable Batteries w/ PCB

<< Previous in Li-Ion Cylindrical Rechargeable Batteries Next in Li-Ion Cylindrical Rechargeable Batteries >>
click smaller images to enlarge
Sale Price: $28.99
Item Number: 39129





Quantity Discounts

QuantityAmount
5 to 10$27.83
11 to 20$27.54
21 to 59$27.25
60 to 99$26.96
100 or more$26.67

Note: If using for Flashlights that uses 2 Cylindrical 18650 Li-Ion Cells, see our Buttop Top versions for better compatibility:

Features and Benefits

  • Unique and New! With PCB protection!
  • Li-Ion 18650 cylindrical rechargeable batteries  with Internal Voltage protection PCB!
  • Internal PCB protection prevents under-voltage at 2.5V and over-voltage at 4.25V.
  • Unique PCB design and patent pending.
  • 3.7V 2600mAh high capacity
  • High energy density and lower weight than other rechargeable batteries
  • Manufactured under ISO9001-2000 to assure quality
  • Battery tested based on International Electrotechnical Commission (IEC) standard to ensure capacity, quality,and life time   

Applications

  • Lighting or other device needs 3.7V power
  • Building portable power device that needs high energy density and low weight

Warning

  • CAUTION: when working with Li-ion cells, they are very sensitive to charging characteristics and may explode if mis-handled.
  • User should have enough knowledge on Li-Ion rechargeable batteries in charging, discharging,and assembly before use.
  • Put the batteries in fire-proof container
  • Do not put batteries on wood surface or carpet when charging
  • The battery is/are not suitable for e-cig mod.
  • Never leave battery un-attended when charging
  • We are not resopnsible for damage of any modification of the batteries in form, shape,or made into packs
  • We are not responsible for any damage caused by misuse or mishandling of these Li-Ion batteries

Product Specifications

  • Capacity* Nominal  2600 mAh, Minimum 2450 mAh
  • Internal PCB protection prevents under-voltage at 2.5V and over-voltage at 4.25V.  UNIQUE INTERNAL PCB!
  • Dimensions:
      Diameter 18+/-0.2 mm
      Height 66+/- 0.2mm 
  • Weight (Typical) Approx. 46 g yes
  • Nominal Voltage: Average 3.7V
  • Cut-off Voltage: 3.0V
  • Internal Impedance: less or equal to 180  milliohm (with PTC)
  • Cycle Performance: 90% of initial capacity at 400 cycles
  • Cycle life: > 500 cycles
  • Charge: Current = 0.5C mA Voltage = 4.2 V End Current = 0.01 mA
  • Discharge: Current = 0.5C mA End Voltage = 3.0V
  • Max. Charging current: 1.5C ma
  • Max. Discharging current 1.5C ma (for continuous discharge) 

Internal PCB Specifications:

Parameter       Minimum Tipical Maxmum Unit
Operation Voltage     1.5   10 V
Excess Charge Detection Voltage   4.2 4.25 4.3 V
Excess Charge Release Voltage   4 4.05 4.1 V
Excess Charge Delay Time   61 77 93 mS
Excess Discharge Detection Voltage 2.437 2.5 2.563 V
Excess Discharge Delay Time   7 10 13 mS
Excess Current Detection Voltage   0.17 0.2 0.23 V
Excess Current Delay Time   9 13 17 mS
Short circuit Protection Voltage    VDD-1.2 VDD-0.9 VDD-0.6 V
Short circuit Protection Delay Time      5 50 uS
Consuming Current       3 6 uA
Standby Current       0.3 0.6 uA
Circuit Impedance       60 70 m-Ohm

Related Products

tax free Li-ion 18650/14500/RCR123A Battery Fast Charger
Tenergy TN270 Li-ion 18500/18650/14500 Fast Battery Charger
Regular Price: $19.99
Sale Price: $12.49
You Save: $7.50 (38 %)

Product Reviews

Rate This Product:
or Create a Review
(2 Ratings, 1 Review) Average Rating:
ratingratingratingratingrating
ratingratingratingratingrating
Great Battery
rs in CA (Northern CA) 3/18/2009 10:58 AM
I needed a replacement battery for a Garmin C330 GPS. I found out the hard way that leaving the GPS on the dashboard of your car in the summer cooks the LiIon battery and shortens the life down to a few weeks instead of a few years. The symptoms of a dead backup battery are long startup times and no GPS function without being plugged into the 12V power cord. Garmin wants $100 to $200+ to "fix" the problem. I did a web search and found in Gpspassion http://www.gpspassion.com/forumsen/topic.asp?TOPIC_ID=67938 that there is a long discussion about replacing the c320/c330 batteries. I found these here and decided to try it out. It worked out great. There are versions of the C330 that have 3 wires connected to the original battery. This is the charging cutoff sensor for Garmin batteries that have a separate PCB along side of the battery. Please read the forums to see what your options are or if you want to perform the replacement BEFORE YOU BUY THIS BATTERY. What to do with the rest? I have replaced the battery pack in a 3xAAA LED flashlight with one of these and it works great. I also replaced the NiCD battery pack in an RC transmitter with another 3 of these in series and now have a much longer run time with the TX. Recommendations for all Li-Ion Batteries http://www.batteryuniversity.com/parttwo-34.htm Check the bottom of the page to get the most out of Li-Ion batteries. Abuse will diminish the capacity by 50% after less than 100 cycles (actually one bad cycle can kill a battery instantly). Care will preserve over 80% capacity after over 500 cycles. Over all, these are a great product and work well.