AT: 7.4v 800mAh Li-Poly Battery Pack without PCB

Features and Benefits

• 7.4V 800mAh Polymer Li-Ion Polymer battery pack 
• Voltage: 7.4v (working)   8.6V ( peak)
• Capacity: 800mAh 
• Max. Discharging rate:  1.5Amp with PCB
• One protective circuit board PCB installed with the battery pack that limits the discharging current of  battery pack to 3Amp. But protect battery from:
  - Over-charging cut-off: 7.4V
  - Over-discharging cut-off: 9.6V
  - Over-drain >6.5Amp
  - Short circuit  and Wrong polarity
• Light-weighted : 1.6 oz.
• Dimension: 64mm x 36mm x 8mm
• 4" (12mm) long prewired and shrink wrapped
• Recommended charger: Universal Li-ion / Li-polymer Smart Charger to charge this battery pack.
• If you connect two of these modules in parallel, you can build a 7.4V 1.75 Ah Battery pack with a 1.7 Amp discharge rate.
• Applications:
  - HID Bikelight or Dive light
  - Autonomous submarine
  - RC Car and RC airplane with greater energy needs
  - Building external battery packs for Laptop computers or 12V portable devices

Caution:

Improper use like overcharging and over discharging can cause explosion and/or fire. User of the battery is required to  have sufficient Li-polymer charging experience and technical knowledge. Tenergy or All-Battery.com are not responsible for any damage or injury caused by misuse, misunderstanding or abuse of this product.