Combo: Tenergy TN268 Li-Ion Battery Charger + 8 pcs RCR123A 900mah Rechargeable Batteries

Tenergy TN268 RCR123A Li-Ion Battery Charger

• Worldwide voltage for 100-240V AC input.
• Four independent charging channels for individual charging and detection.
• Constant current and voltage charging mode.
• Reverse polarity protection - automatically terminates charging (LED flashes red when the polarity is connected in reverse).

Operation Instructions:

1. Insert 1-4 pieces of Tenergy RCR123A rechargeable Li-ion batteries into the battery compartment.

2. Make correct contact for polarity (+ and -) according to the sign in the battery compartment.

3. Plug the DC connector of the AC adapter into the charger, then plug adapter into correct household electric outlet. The LED will light up in red to indicate proper charging.

4. When the LED indicator changes from red to green, the battery in that channel is fully charged.

LED Indicator:

Specification:

• Input: 12V; 550mA
• Output: 4.5V; 250mA x 4
• Applicable battery type: RCR123A Rechargeable Li-ion Battery.

Charging Time Table:

The charging time is just for reference, and the other battery capacity can be calculated in the same way.

Tenergy RCR123A 3.0V 900mAh Rechargeable Li-Ion Battery

• Rechargeable CR123A Li-Ion Batteries with 3.0V average working voltage (4.2V at peak without load).
• Tenergy RCR123A can be recharged up to 1000 times. 1 RCR123A Li-ion = 1000 CR123A Primary Cell.
• Replaces most of CR123A primary Lithium battery for digital cameras and flashlights.
• Do not charge the battery cells in other brand RCR123A battery charger. We are not responsible for damage caused by misuse.
• Open circuit voltage of RCR123A (3.0V) is much higher than primary Lithium battery (3.0V). It may burn certain bulb of flashlight.
• Please make sure your device can accept 4.2V voltage before use.
• Internal voltage regulators modified voltage to achieve average working voltage of 3.0V.
• Internal over-charge and over-discharge protection to prevent battery over use. The current will be shut off when the battery voltage drops below 2.5V.

* This battery is not compatible with SureFire Flashlights!

Specification:

• Capacity: 
• Nominal: 600mAh
• Maximum: 900 mAh
• Dimension: 16.96 (D) x 34.33 (H) mm.
• Weight: 17 g or 0.6 Oz.

Download RCR123A discharge curve graph here.

Warnings:

• Do not disassemble charger.
• Do not charge other types of battery chemistries; this may cause explosion and/or charger failure.
• Charger is only intended for indoor usage and should be kept away from high temperature areas.
• Keep charger away from humidity surroundings and no liquid should be subjected to charger. Results may cause charger failure.
• Should be kept out of children's reach.
• Charger may not be able to fully charge batteries that have not been in use for long periods of time. Several recycles of charging and discharging will improve battery's performance.