Protection Circuit Module for 4 Cells LiFePO4 Battery Pack (10A/30A)

<< Previous in PCB/PCB/BMS for LiFePO4 Battery Packs Next in PCB/PCB/BMS for LiFePO4 Battery Packs >>
click smaller images to enlarge
ratingratingratingratingrating
Regular Price: $42.60
Sale Price: $35.95
You Save: $6.65 (16 %)
Item Number: 32105





Quantity Discounts

QuantityAmount
5 to 10$34.51
11 to 20$34.15
21 to 59$33.79
60 to 99$33.43
100 or more$33.07

Specifications of 4 Series LiFePO4 Batteries Charge & Discharge Guard Shield

Application:
The product could be widely used in the fields of electric devices, electric vehicles, standby power supply and power supply of military equipment, etc.

Main Functions:
The product has 6 main functions: over charge, over discharge, over current, short circuits, balancing and low-current lock.

  1. Function of over charge protection: once voltage of any battery in the group gets higher than the over charge protection point, charge cuts off to ensure all batteries work within the over charge protection point.
  2. Function of over discharge: once voltage of any battery in the group gets lower than the over charge protection point, discharge cuts off to ensure all batteries work beyond the over charge protection point.
  3. Function of over current: during the discharge process of battery group, once discharge current gets over the set over current protection point, output cuts off to ensure battery group works within the safe limit of current.
  4. Function of short circuit protection: once battery group's output port appears the condition of short circuit, it cuts off to ensure battery group not to be damaged because of short circuit.
  5. Function of voltage balancing: in the late charging period of battery group, voltage difference that appears during the using process of each battery could get balancing revised to ensure battery group's capacitance.

Specified Types: 4S LFP PCM

Technical Index:

Item

Content

Specification

Over charge protection

 

 

Over charge detection voltage

3.700±0.05V

Over charge detection delay time

2±0.5S

Over charge release voltage

3.450±0.05V

Over discharge pretection

Over discharge detection voltage

2.500±0.05V

Over discharge detection delay time

2±0.5S

Over discharge release Voltage

3.000±0.05V

Rated operational current

≤10A

Over current protection

 

 

Over current detection current

30±0.5A

Release condition

≤200mA

Detection delay time

2±0.5S

Short protection

Detection condition

Exterior short circuit

Protection

244±5uS

Release condition

Cut short circuit

Balanced

 

 

 

Balanced open voltage

2.500±0.025V

Balanced differential pressure open voltage

≥30mV

Balanced differential pressure off voltage

≤10mV

Balanced current

Max: 95mA

Temperature

Operation temperature 55±3℃

Operation temperature

60±3℃

Interior resistance
Main loop electrify resistance
RSS≤20mΩ
Current consumption
Current consume in normal operation
800μA Max
NTC / /
Dimension (mm)
75*50*7

Download product data sheet here.

Connection:

B- first cell negative terminal
B1 first cell positive terminal
B2 second cell positive terminal
B3 third cell positive terminal
B+ forth cell positive terminal
P- battery pack output or charger's negative terminal
P+ battery pack output or charger's positive terminal

 

Usage and Attention:

  • After purchasing the protection mould, users should connect lines in compliance with the instruction. Voltage usually exists in the battery, so operators should peel one line and then connect another starting from B-. Lines should be connected from the low position to the high position with no mistake of order, or the irreparable damage could be caused.
  • When lines get connected, bits of copper and tin should not cling to the guard shield.
  • Protection board should be connected to battery group with compliance to specifications and any leading line should not be put on the back of the board but on the lateral side.
  • When equipping the guard shield, hard epoxy sheer should be fixed on the back of the board as the barrier to prevent the squeezing against short circuit.
  • When welding output lines, power supply line with the proper diameter should be chosen to prevent great temperature rising and great dropping of line voltage while high current discharges.
  • The guard shield is usually fixed in the battery box, insulation, heat relief and tightness should be greatly concerned, or the internal short circuit could lead to some danger.
  • The full-charged battery group should be put properly out of children's touch.
  • If any unusual condition appears during the using process, please stop using the product immediately.

Product Reviews

Rate This Product:
or Create a Review
(16 Ratings, 0 Reviews) Average Rating:
ratingratingratingratingrating