Combo: Tenergy 1-4 Cells Li-PO/Li-Fe Balance Charger + 11.1V 2200mAh 25C LIPO Battery Pack w/ Deans **Backordered: ETA 04/04 **

Tenergy 1-4 Cells Li-PO/Li-Fe Balance Charger - Great for Airsoft & RC Car Battery Packs 

Can't afford LIPO balance chargers that can cost upwards of $75.00? Do the prices of those chargers prevent you from going with LIPO/LiFePO4 batteries?

Recently Released! A full featured 3.7v-14.8v (1S-4S) LIPO/LiFePO4 Balance charger at an amazing value. VERY popular for smaller capacity (mAh) Airsoft and other custom battery packs. Power Supply already included. Ready to charge your LIPO/LiFePO4 packs right out of the package. Also supports large capacity (mAh) packs, but will require a longer time to be fully charged.

Features & Benefits

• Built-in balancer. Batteries are automatically balanced during charging, ensuring full charge
• Advanced individual charging method-charge each cell individually
• Automatically charging process - makes it easy to use
• Light weight and attractive aluminum alloy case
• Safer and faster charging for better battery performance and life
• Fits 1S to 4S Li-PO/Li-Fe battery packs with XH type balance connector
• Multiple protection features provide maximum safety
• Charge Rate: 1A (1,000mah per hour)
• Applicable for Li-ion, LiPo and LiFePO4 battery packs

Warning - Do Not charge the following types of battery:

• Lead acid battery or VRLA
• NiMH or NiCD battery pack
• Non-rechargeable battery (explosion hazard)
• Faulty or damaged battery
• Any other types except for LiPo/Li-ion/LiFePO4 battery packs

11.1V 2200mAh 25C Li-Poly Battery Pack with Deans Connector 

• Maximum Discharge Rate: 25C
• Discharge (Output) Leads: 14 AWG silicon wire, 105 mm long, with Deans connector
• Charging (Balancing) Lead: TP Style 4-pin connector. 22AWG PVC wire, 35 mm Long
• Perfect for 400 class helicopter
• Dimension: 105mm x 35mm x 23mm
• Weight: 6 oz / 169g
• Recommend to use Cell Shield (for 2-6 Series connected packs) or LiPo Shield (for 1-12 series connected packs) to prevent the packs from over discharge. A group of paralleled cells can be treated as one single cell.

Note: Please read instructions before using!