Tenergy 2A Charger for 48V NiMH/NiCD Battery Pack

• The best 48V NiMH/NiCD Battery Intelligent Charger in the market
• Charger Switches to Trickle status automatically when any of the following criteria is reached: (The strongest protection for your battery)
  • Minus △V Value > 3~5 mV/cell
  • Or Maximum Cell Voltage > 1.56V/cell(NI-MH)1.7V/cell（NI-CD）
  • Or Max. Cell Temp.>55℃
  • Or Max. Cell Temp. exotherm >18℃
  • Or Safety Timer=18hours
• Compatible with 48V NiMH/NiCD Battery from 1.6AH to 30AH
• Charge current: 2A ± 0.2A
• Reversal polarity and Short-Circuit Protection
• Thermistor: NTC type, 10K and β=3950
• Input voltage: 90~264VAC 50/60Hz
• Dimensions: L/W/H, 148mm/78mm/43mm
• Power Indication & LED Indications
  • Power ON -- Red Flashing
  • Charging -- Red
  • Fully Charged -- Green
  • Errors – Red Flashing

Accessories Included

• Water Proof 3 Pin kirksite Connector (male and female)
• Tamiya Female connector.
  
• Alligator clips (red + black).
  
• NTC themistor cable.

Caution

• The charger is designed for indoor use only. Don't leave the charger unattended during charging.
• The Charger should be positioned horizontally and work in well ventilated condition, avoid water and keep away from flammable explosive goods.
• Don't cover the charger when charging, ambient temperature shall not be more than 40^oC
• Don't touch the plug.
• Don't leave the batteries and chargers on wood surface or carpet.
• Cut off the power supply before connect or disconnect the charger with batteries.
• Don't try to disassemble the charger, High voltage inside, danger!