Charger

• Universal Li-Ion battery charger for18650, RCR123A, 17670 3.7V Li-Ion cells.
• Can be used anywhere worldwide with 100-240 V input. Good for oversea travel.
• Smart charger automatic cut-off
• LED light for charging status indication:
  • Orange for charging and green for charging completed
  • If LED light is off, the cells are not suitable for charging with unit.

Technical Specifications

• Power Input: AC110~240V, 50/60Hz
  
• Power Output: DC5.5V-350mA
  
• Charging time
  800mAh: 3 hours
  2000mAh: 8.5 hours
  2200mAh: 9.5 hours
  
• Dimension: 3 13/16" x 2 3/8" x 1 5/16"
  
• Weight: 3.9oz charger and adaptor together
  

Battery Features

• Lithium Ion 18650 cylindrical rechargeable batteries
• 3.7V 2000mAh high capacity
• Higher energy density and lower weight than other types rechargeable batteries
• Manufactured under ISO9001-2000 to assure quality
• Internal PCB protects against under and over charging- low voltage 2.8, high voltage 4.2.
• Building Laptop Battery
• Building portable power device needing high energy density and low weight
• Battery tested based on International Electronic Commission (IEC) standard to ensure capacity, quality and life time

Technical Specifications

• Capacity* Nominal 2000 mAh, Minimum 1950 mAh
  
• Dimensions:
  Diameter 18+/0.2 mm
  Height 68+/- 0.2mm
  
• Weight (Typical) Approximate. 46 g yes
  
• Nominal Voltage: Average 3.7V
  
• Cut-off Voltage: 3.0V
  
• Internal Impedance: less or equal to 180 milliohm (with PTC)
  
• Cycle Performance: 90% of initial capacity at 400 cycles
  
• Cycle life: > 500 cycles
  
• Charge: Current = 0.5C mA Voltage = 4.2 V End Current = 0.01 mA
  
• Discharge: Current = 0.5C mA End Voltage = 3.0V
  
• Max. Charging current: 1.5C ma
  
• Max. Discharging current 1.5C ma (for continuous discharge)

WARNING

• Use special caution when working with Li-ion cells, they are very sensitive to charging characteristics and may explode if mishandled.
• Protective Circuit Board is required when making packs
• Make sure user has enough knowledge on Li-Ion rechargeable batteries in charging, discharging and assembly before use.
• Put the batteries in fire-proof container in charging
• Never leave batteries unattended when charging
• Do not put batteries on wood surface or carpet when charging
• We are not resopnsible for damage if there is any modification of the batteries in form, shape or made into packs
• We are not responsible for any damage caused by misuse or mishandling of theses Li-Ion batteries