Wanna fly the Blade CX/CX2 helicopter higher and smoother?

Try this new 25C pack specially designed for Blade CX2 helicopter.
Right size, fits perfectly in CX2. Wanna fly the Blade CX/CX2 helicopter higher and smoother?

Try this new 25C pack specially designed for Blade CX2 helicopter.
Right size, fits perfectly in CX2. NO modification needed! Same discharging and balancing connector as factory pack. It can be charged on the factory charger. Plug and Play!

It will simply blow you away, you will never wanna go back to the old packs.

Features and Benefits

• Continuous Discharge Rate: 25C / 22A
• Burst Discharge Rate: 50C / 45A
• Discharge (Output) Leads: 20 AWG silicon wire, 97 mm long, JST(BEC) connector (Same as the factory pack)
• Charging (Balancing) Lead: JST(Align, E-flight) Style 3-pin connector. 24AWG PVC wire, 38 mm Long (Same as the factory pack)
• Dimension: 68.2x 24.5 x 12.2 mm
• Weight: 45.3g / 1.6oz
• Recommend to use Cell Shield (for 2-6 Series connected packs) or LiPo Shield (for 1-12 series connected packs) to prevent the packs from over discharge. A group of paralleled cells can be treated as one single cell.

Note: Please read instructions before using!

Features and Benefits

• Continuous Discharge Rate: 25C / 22A
• Burst Discharge Rate: 50C / 45A
• Discharge (Output) Leads: 20 AWG silicon wire, 97 mm long, JST(Align, E-flight) connector (Same as the factory pack)
• Charging (Balancing) Lead: JST(Align, E-flight) Style 3-pin connector. 24AWG PVC wire, 38 mm Long (Same as the factory pack)
• Dimension: 68.2x 24.5 x 12.2 mm
• Weight: 45.3g / 1.6oz
• Recommend to use Cell Shield (for 2-6 Series connected packs) or LiPo Shield (for 1-12 series connected packs) to prevent the packs from over discharge. A group of paralleled cells can be treated as one single cell.

Note: Please read instructions before using!