|
| All-Battery.com
Your one stop shop for rechargeable batteries, battery chargers, power inverters, car adaptors and more |
|
|
| |
Protection Circuit Module ( PCB ) for 25.9V Li-Ion /Li-Polymer Battery Pack (7 cells with 10A limit )-LI_PCB_25.9V1
|
|
Protection Circuit Module ( PCB ) for 25.9V Li-Ion/Li-Polymer Battery Pack (7 cells with 10A limit )-LI_PCB_25.9V1
|
Specifications:
Easy Connection:
Li-Ion and Li-polymer Battery packs must have a protection circuit module to keep Li-Ion/Polymer Battery packs from over charge, over discharge, and accidental battery explosion due to its extra high energy density. This Protection Circuit Board is specially designed for 25.9V 7 Cells Li-Ion Battery packs made of Li-ion and Li-Polymer cells.
- Keeps 25.9V Li-Ion Battery pack from overcharge and over discharge
- Keeps 25.9V Li-Ion Battery pack 's discharging current lower than 10 A
- Short Cut Protection
- Designed for 7 Cells Li-ion / Li-polymer Battery Packs ( 25.9V up to 20 Ah)
- Battery Protection
- Dimension: 2.87" x 1.69 " inch
PCB Indications
- B+ Battery (+)
- B- Battery (-)
- P+ OUT (+) /Load (+)
- C+ OUT (+) /Charge (+)
- P- OUT (-) /Charge(-) / Load(-)
Electric performance
- Overcharge Protection voltage for single cell: 4.235V +/- 0.025V
- Overdischarge Protection voltage for single cell: 2.30V +/-0.08V
- Over current detection Protection <= 10 A +/-1A
- Supply current: MAX 600uA
- Short circuit Protection
- 0 V charge
- Protection circuitry Resistance: <= 10 mill-ohms
| | |
