The HOTTEST new charger on the market
- Handles NiMH, NICD, Li-Po,Li-ion, Li-Fe, SLA Batteries
- Build in Balance
- Temperature Sensor
- USB Port to Monitor and acquire Data From Your Computer
- 110-240V AC and 11-18V DC Power Supported,
||DC 11~18 volts"
||0.1 to 7.0A
||0.1 to 5.0A
|No. of cycles:
||1 to 5 times
|Battery data memory:
||up to 10 data
||35oz / 1000g
||6.2" x 4.7" x 1.5" / 160x120x40 mm
- Optimized operating software
When charging or discharging, the BC8 offers an 'AUTO' function that sets the feeding current or the cell count of the Lithium battery automatically. For Lithium batteries, this can prevent an over-charging situation which can lead to an explosion should the user not set the program correctly. Every program in the unit is programmed with safety monitoring to validate the user information to ensure maximum safety. These parameters can be set by the user.
- High-power and high-performance circuit
The BC8 employs a circuit that has maximum output power of 150W. As a result, the BC8 can charge or discharge up to 27 cells of NiCd/NiMH and 8 series of Lithium batteries with maximum current of 7.0A.
- Individual voltage balancer for Lithium batteries inside
Built into the BC8 is an individual-cell-voltage balancer. No external balancer is needed when charging Lithium batteries (LiIo/LiPo/LiFe) for balance charging. Below is the cell connection diagram. Please use the above pull down menu to select your included Balance Board.
- Balance individual cells on discharge
The BC8 also can monitor and balance individual cells of the Lithium battery pack during the discharge process, as well as the charge process. If the voltage of any one cell varies abnormally, the process will be stopped with the error message.
- Accept various types of Lithium battery
BC8 can accept three types of Lithium batteries - LiIo, LiPo and LiFe. They have different characteristics by their chemistry, such as minimum, maximum, and charge termination voltages.
- Lithium battery 'Fast' and 'Storage' mode
The BC8 offers additional Lithium programming. 'Fast' charge reduces the charging time of the Lithium battery and the 'Storage' mode controls the final voltage of the battery to be suit for long time storage.
- Data store/load
10 data of different batteries programs can be stored and retrieved. These data files can be recetrived at any time you need them without reprogramming.
- Cyclic charging/discharging
The BC8 can perform 1 to 5 cycles of charge>discharge or discharge>charge for battery break in/refreshing and balancing.
- PC based analysis using USB communication
For the advanced user, the BC8 INCLUDES a PC based program that can analyze the characteristic of the battery through the computers USB port. The software will graph voltage, current, capacity and temperature curves. It also shows the individual voltages of each cell in the Lithium battery pack.
- Back-light LCD screen
You can adjust the brightness of LCD display
- Robust outer aluminum case
High-quality aluminum case is durable and very efficient to cool out the internal heat
What you get:
- BC-8 Charger
- USB computer cord
- Temperature probe
- Printed manual
- Balancing adapters
- Quick-start guide