e-Station BC-6 AC/DC Balancing Charger for NiMH/NiCD/Li-PO/Li-Fe/SLA

Optimized operating software

When charging or discharging, BC6 has an 'AUTO' function that sets the feeding current or the cell count of Li-ion/Li-Polymer battery automatically. Especially for Li-ion/Li-Polymer batteries, it can prevent the over-charging which can lead to an explosion by users fault. Every program in the unit is controlled with mutual links and communication for every possible error so it introduces maximum safety. These can be set at users option.

Dual input power

BC6 employs the circuit that can be operated with the input power of AC(Alternating Current) or DC(Direct Current). For AC input, it contains a AC-DC switching power supplier which has 5A of power capacity and maximum output power of 50Watts for charging. As a result it can charge up to 16 cells of NiCd/NiMH and 6 series of Li-ion/Li-Polymer batteries with maximum current of 5.0A.

Individual voltage balancer for Li-ion/Li-Polymer batteries inside

BC6 has an individual-cell-voltage balancer inside. So it does not need any balancer separately when charging Li-ion/Li-Polymer batteries (LiIo/LiPo/LiFe) for cell voltage balancing.

Balance individual cells on discharge

BC6 also can monitor and balance individual cells of the Li-ion/Li-Polymer battery pack during the discharge process. If the voltage of any one cell varies abnormally, the process will stop with the error message.

Accept various types of Li-ion/Li-Polymer battery

BC6 can accept three types of Li-ion/Li-Polymer batteries - LiIo, LiPo and LiFe. They have different characteristics by their chemistry. You can select any one of them that you are going to process before charging.

Li-ion/Li-Polymer battery 'Fast' and 'Storage' mode

You can charge Li-ion/Li-Polymer battery for special purposes. 'Fast' charge reduces the charging time of Li-ion/Li-Polymer battery and 'Storage mode controls the final voltage of the battery to be suit for long time storage.

Data store/load

For users convenience it can store maximum 5 data of different batteries. You can establish the data contains program setting of the battery to charge or discharge continually. This data can be called out at any time you need and the process can be executed without program setting.

Cyclic charging/discharging

Perform 1 to 5 cycles of charge>discharge or discharge>charge continually for battery refreshing and balancing.

PC based analysis using USB communication

For technical expert, BC6 offers PC based program that analysis the characteristic of the battery by USB port. It shows a graph of voltage, current, capacity and temperature curves. It also shows the individual voltage of each cell in the Li-ion/Li-Polymer battery pack.

Robust outer aluminum case

High-quality aluminum case is durable and very efficient to cool out the internal heat