Categories
More Information
HACKER SAFE certified sites prevent over 99.9% of hacker crime.

Polymer Li-Ion Battery 3.7V 50Ah (13212223)_1

<< Previous in hot3 Next in hot3 >>
click smaller images to enlarge
Regular Price: $429.99
Sale Price: $219.99
You Save: $210.00 (49 %)
Item Number: PL13212223
free shipping

Quantity Discounts

QuantityAmount
5 to 19$208.99
20 to 99$200.19
100 to 499$191.39
500 to 4999$182.59

Features:

  • Tenergy Unique High-Capacity Li-Po Single Cell
  • High operating voltage
  • Energy density is high,volumetric energy density of 350Wh/L and gravimetric energy density of 135Wh/kg.
  • No memory effect
  • Self-discharge is less than 10% per month
  • Charge/discharge cycle characteristics are excellent
  • Safety characteristics are excellent
  • The battery has a wide discharging temperature range of -20 °C to +60 °C
  • The capacity in amp-hours is guaranteed, and will be exceeded most of the time.

Item

Spec

Note

Model

13212223/50000mAh

 

Charge
Voltage

4.2V

 

End-of-charge voltage

4.2V

CC\CV

Nominal
Voltage

3.7V

Cell Voltage between 3.6V ~3.9V before shipping

Nominal
Capacity

≥50000mAh@ 0.2C Discharge

Nominal  Capacity  refer  to  the  capacity of  0.2C  discharge  with  2.75V  cut-off voltage,  after  charging  with  standard method.

Cycle Life

≥ 300 Times

One  cycle  refer  to  one  charge  period and then one discharge period.
Test condition:
Charge: 0.2C to 4.2V Discharge: 0.2C to 2.75V
The  cycle  life  is  the  cycle  times  when
the discharge capacity is about 80% of the rated capacity.

Self-discharge

Residual Capacity>90%

After   standard   charging,   storied   at
25°C±0.5°C for 30 days, then measure the capacity as item 4.

Impedance

Typical:8mΩ
Max: 10mΩ

After  standard  charging,  measure  the internal resistance with AC1KHz

Max. Charge
Current

1.0C

 

Max. Discharge Current

1.0C

 

Discharge Cut-off Voltage

2.75V

 

Operating
Temperature

Discharge:-10℃~ +60℃
Charge: 0 ℃~ +45℃

Cells   must   be   storied   at   3.6V-3.9V. During long period storage, cells should be   maintained   every   90   days.   The method  is  to  do  a  charge-discharge cycle  with            standard              method,    then charge to 3.7—3.9V.

Storage
Temperature

-20 ℃~+45℃

 

Cell Weight

Approx   1.4Kg

 

Cell
Dimension

Length:225mm Max
Width:212mm Max
Thickness:13.5mm Max

Measured   with   weighting   300gf   at
25℃± 0.5℃          Not including Tabs

Cautions

  • Use special caution when working with Li-ion cells, they are very sensitive to charging characteristics and may explode if mishandled.
  • Make sure user has enough knowledge on Li-Ion rechargeable batteries in charging, discharging and assembly before use.
  • We are not responsible for any damage caused by misuse or mishandling of these Polymer Li-Ion batteries

3.7V 50000mAh (13212223): Datasheet

Related Products

PCB 3.6V
Protection circuit Module ( PCB ) for 3.7V Li-Polymer Battery (8.5A limit)
Sale Price: $2.75
Protection circuit Module ( PCB ) for 3.7V Li-Polymer Battery (8.5A limit)
Protection circuit Module ( PCB ) for 3.7V Li-Polymer Battery (8.5A limit)-PCB1S
Smart Li-ion charger
TLP-2000 Universal Smart Charger for Li-Ion/Polymer battery Pack (3.7V-14.8V 1-4 cells)
Regular Price: $49.99
Sale Price: $24.95
You Save: $25.04 (50 %)
TLP-2000 Universal Smart Charger for Li-Ion/Polymer battery Pack (3.7V-14.8V  1-4 cells)
Universal Smart Charger for 3.7 -14.8 V Li-Ion/Polymer battery Pack (1-4 cells)
PCB 14.8V
Protection Circuit Module ( PCB ) for 14.8V Li-Ion Battery Pack (4 cells with 6.5A limit )
Regular Price: $17.99
Sale Price: $9.65
You Save: $8.34 (46 %)
Protection Circuit Module ( PCB ) for 14.8V Li-Ion Battery Pack (4 cells with 6.5A limit )
Protection Circuit Module ( PCB ) for 14.8V Li-Ion Battery Pack (4 cells with 6.5A limit )-LI_PCB_14V4

Product Reviews

(0 Ratings, 0 Reviews)