Categories
More Information

ABOUT TRUST ONLINE

Mailing Lists

Protection Circuit Module (PCB) for 14.8V Li-Ion Battery Packs 5A Working (6.5A cut-off)

<< Previous in For 4S (14.8V) Packs Next in For 4S (14.8V) Packs >>
click smaller images to enlarge
ratingratingratingratingrating
Sale Price: $9.00
Item Number: 32010




Quantity Discounts

QuantityAmount
5 to 10$8.64
11 to 20$8.55
21 to 59$8.46
60 to 99$8.37
100 or more$8.28

Features and Benefits

  • Protection Circuit Board for 14.8V 4 cells Li-ion and Li-polymer battery pack
  • Designed for 14.8V Li-ion or Li-Polymer battery
  • Prevents 14.8V Li-ion  or Li-polymer battery from over-charging, over-discharging and from discharging current more than 6.5A
  • Internally trimmed charge and discharge voltage limits
  • Discharge current limit detection
  • Low current standby mode when cells are discharged
Connection Instruction
  • B+:Connected to the fourth battery's positive terminal
  • B3+:Connected to the third battery's positive terminal
  • B2+:Connected to the second battery's positive terminal
  • B1+:Connected to the first battery's positive terminal
  • B-:Connected to the first battery's negative terminal
  • P+:Connected to the battery's output or the charger's positive terminal
  • P-:Connected to the battery's output or the charger's negative terminal


Technical Specifications

Item

Content

Criterion

Model 32010 4S--5A working current

Over charge Protection

Over charge detection voltage

4.25±0.025V

Over charge release voltage

4.15±0.05V

Over discharge protection

Over discharge detection voltage

2.50±0.08V

Over discharge release voltage 3.00V±0.1V

Rated operational current

≤5A

Over current protection

Over current detection current

6.5±1.5A

Release condition

Cut load

Detection delay time 

5~15ms

Short protection

Detection condition

Exterior short circuit

Release condition

Cut load, automatically recover

Interior resistance

Main loop electrify resistance

RSS≤30mΩ

Current consumption Current consume in normal operation 30μA Max

Dimension(L*W*H)

50*16*3.5mm

 

Download data sheet here.


Application Notes

  • Do not subject the PCB to input voltage over 20V. Input voltage over 20V will damage the PCB.
  • Please use the compatible charger for your battery pack. Pay special attention to your input and output voltage current to avoid PCB damage.
  • When mixing over-charged batteries and over-discharged batteries together, PCB will be in dual state of over-charging and over-discharging. In this situation, charging and dis-charging are both disabled.
  • Internal static charge protection circuit built into the PCB. However, do not subject the PCB to high static charge to avoid damage.
  • Without the written agreement from us, please don't use this PCB for application in medical instruments, emergence devices, auto and airspace vehicles or other device that might have impact on human body.

Because of the very high energy density, Li-Ion Battery pack must be connected to a protection circuit module to prevent  accidental battery explosion caused by over-charging or over-discharging.
 

Related Products

Universal Fast Smart TLP3000 1.5A Charger for Li-Ion / Li-polymer battery Pack (14.8V 4 cells) - UL approved
Sale Price: $19.99
ratingratingratingratingrating
Universal Fast Smart TLP3000 1.5A Charger for Li-Ion / Li-polymer battery Pack (14.8V 4 cells) - UL approved
Fast Smart Charger for Li-Ion / Li-polymer battery Pack (14.8V, 4 cells)
Smart Li-ion charger
Tenergy TLP-2000 Smart Charger for Li-Ion/LiPo Battery Packs: 3.7V - 14.8V
Regular Price: $25.99
Sale Price: $21.95
You Save: $4.04 (16 %)
ratingratingratingratingrating
Tenergy TLP-2000 Smart Charger for Li-Ion/LiPo Battery Packs: 3.7V - 14.8V
Universal Smart Charger for 3.7 -14.8 V Li-Ion/Polymer battery Pack (1-4 cells)
free shipping

Product Reviews

Rate This Product:
or Create a Review
(8 Ratings, 0 Reviews) Average Rating:
ratingratingratingratingrating