Combo: Tenergy TB6B Multifunctional Balance Charger for NiMH/NiCD/Li-PO/Li-Fe Battery Packs + Power Supply

Supports MULTIPLE types of battery packs with one single charger! The follow packs are supported:

What does it mean for an RC Car/Helicopter or Airsoft Hobbyist?

• Charge your NiMH/NiCD Receiver Packs: 3.6v, 4.8v, 6v, or 9.6v
• Charge your LiFE Packs: 3.2v - 19.2v
• Charge your normal NiMH/NICD Packs: 7.2v, 8.4v, 9.6v, 10.8v, 12v
• Charge your High Performance LIPO Packs: 7.4v, 11.1v, 14.8v, 18.5v
• Charge your Airsoft NiMH/NICD Packs: 8.4v, 9.6v, 12v
• Charge your Airsoft LIPO/LiFe Packs

  *Note: Pack voltages above are samples of the more popular hobby packs. See bottom chart for full Chemistry and Voltage support.
  
  One single TB6b supports all these battery packs. PLUS! It will balance your expensive LiFe & LIPO packs to ensure longer cycle and battery life.

Future proof yourself for any new battery pack or upgrades, instead of having contantly buy 1 charger for each type of pack.

What does it mean for a custom pack builder?

• Endless fun and charging capabilities - you have an All-in-One charger for any kind of pack idea you have!

Charger Specifications:

1. Handle NiMH, NICD, Li-Po,Li-ion, Li-Fe, SLA Batteries.
2. Easy to Read LCD
3. Built-in Balancer
4. DC 11V~15V, which can be directly connect to Automobile Battery. The working electric current is less than 5A when it is charged in full load. The current of the fuse is 10A which could prevent short circuit.

**For Product Manual --  DOWNLOAD Here

Optimized operating software

When charging or discharging, TB6B has an 'AUTO' function that sets the feeding current or the cell count of the battery automatically. Especially for Li-ion/Li-Polymer batteries, it can prevent the over-charging can lead to an explosion by users fault. Every program in the unit is controlled with mutual links and communication for every possible error so it introduces a maximum safety. These can be set at users option.

Individual voltage balancer for Li-ion/Li-Polymer batteries inside

TB6B has an individual-cell-voltage balancer inside. So it does not need any balancer separately when charging Li-ion/Li-Polymer batteries (LiIo/LiPo/LiFe) for cell voltage balancing.

Balance individual cells on discharge

TB6B also can monitor and balance individual cells of the battery pack during the discharge process. If the voltage of any one cell varies abnormally, the process will be stopped with the error message.

Accept various types of battery

TB6B can accept three types of batteries - LiIo, LiPo and LiFe. They have different characteristics by their chemistry. You can select any one of them that you are going to process before the job.

Battery 'Fast' and 'Storage' mode

You can charge Li-ion/Li-Polymer battery for special purposes. 'Fast' charge reduces the charging time of battery and 'Storage mode controls the final voltage of the battery to be suit for long time storage.

Data store/load

For users convenience it can store maximum 5 data of different batteries. You can establish the data contains program setting of the battery to charge or discharge continually. These data can be called out at any time you need and the process can be executed without program setting.

Cyclic charging/discharging

Perform 1 to 5 cycles of charge>discharge or discharge>charge continually for battery refreshing and balancing.

Robust outer aluminum case

High-quality aluminum case is durable and very efficient to cool out the internal heat

Constant Current Switch Power Supply

• Input: 100-240V AC, 50/60Hz 2A
  
• Output: 12V, 5A

TB6B Product Video:

TB6B Charging Tutorial Video: